; TEMTO Technology Co., Ltd - Enable & perfect your technologies!
    


Home > Products > Optical Products > Waveplates
WaveplateLow-Order WaveplateZero-Order WaveplateTrue Zero-Order WaveplateDual Wavelength WaveplatePolarization RotatorRing Mount for Waveplate
Waveplate


Principle of Waveplate

Waveplates (retardation plates or phase shifters) are made from materials which exhibit birefringence. The velocites of the extraordinary and ordinary rays through the birefringent material varies inversely with their refractive indices. This difference in velocities gives rise to a phase difference when the two beams recombine. In the case of an incident linearly polarized beam this is given by =2d(ne-no)/, where is phase difference; d is thinkness of waveplate; ne, no are refrective indices of extraordinary and ordinary rays respectively; is wavelength. At any specific wavelength the phase difference is governed by the thinkness of the retarder.

Half Waveplate

The thickness of a half waveplate is such that the phase difference is 1/2-wavelength (/2, true-zero order) or some multiple of 1/2-wavelength [(2n+1)/2, multiple order].

A linearly polarized beam incident on a half waveplate emerges as a linearly polarized beam but rotates such that its angle to the optical axis is twice that of the incident beam. Therefore, half waveplates can be used as continuously adjustable polarization rotators. Half waveplates are used in rotating the plane of polarization, electro-optic modulation and as a variable ratio beamsplitter when used in conjunction with a polarization cube.

Quarter Waveplate

The thickness of the quarter waveplate is such that the phase difference is 1/4 wavelength (/4, true-zero order) or some multiple of /4 wavelength [(2n+1)/2, multiple order].

If the angle (between the electric field vector of the incident linearly polarized beam and the retarder principal plane) of the quarter waveplate is 45, the emergent beam is circularly polarized. When a quarter waveplate is double passed, i.e. by mirror reflection, it acts as a half waveplate and rotates the plane of polarization to a certain angle. Quarter waveplates are used in creating circular polarization from linear or linear polarization from circular, ellipsometry, optical pumping, suppressing unwanted reflection and optical isolation.

TEMTO´s Waveplates, including octadic-wave (/8), quarter-wave (/4), half-wave (/2) and full-wave () plates, are widely used in synthesis and analysis of light in various states of polarization. The standard specification of TEMTO´s waveplates are listed below for your reference. 

 
The standard waveplate wavelengths of TEMTO´s waveplates
266nm
355nm
532nm
632.8nm
780nm
808nm
850nm
1064nm
1310nm
1550nm
 
Order information: Part No. - Wavelength - Retardation
For example: OWP1110 - 632.8nm - /2

Note: Other wavelengths within the range of 200-2300nm are also available upon request. Metal Mount is available upon request.

Copyright © 2004-2018 TEMTO Technology Co., Ltd, TEMTO®, All rights reserved. ICP05004887
Tel: +86-591-8787-0640  Fax: +86-591-8787-0641  E-mail: sales@temto.com  http://www.temto.com